FAB LAB
Jun 16, 2022 | Uncategorized
3D PEINTER
- do the desigmning in tinkercad software or any cad software
- https://www.tinkercad.com/
4. then export the file in stl format
5. then open the factory software
6.
7. open the file in it
8. then do the settings of the type of filament
9. then connect a pendrive and prepare the data
10 . once it is complete connect it to the 3d printer and start
2.VINYL CUTTER
- i got you covered baby
- design the file in inscape
- https://inkscape.org/
- open image in inscape
5. go to paths and trace bitmap
6. seprate the image with the bitmap
7. delete the image
8. and set stroke and hit the cross icon to cut the paint on it
9. export the file in png image file format
10. go to mods ce nodes
http://www.modsproject.org/
3 LASER CUTTING A BOX
today I will teach you a simple method to cut a box on laser cutter wity the hinges which are known as fingers
- head over to makercase for laser cutte
- link = https://en.makercase.com/#/basicbox
4. select the type of box that you want to make in my cae it wa sd the basic box
5. in here seleclct the appropriate metrics in my case or reccomended is mm
and then adjust the values till desired box is achived
6. select the closed box or open box
7. then selest the fingers and the no of fingers by sliding the slider
8. download the file in SVG file format
open the file in inscape
10 . do the adjusetments if necessary
11 . save the designe in the dxf file format
12 . import the file in RD WORKS
13.
14. then do the settings according to the reccomened values
15. start the laser cutter and then upload the file by downloading it with the connections
16. start the laser cutter and you are done with this magnificent product
2.VINYL CUTTER
- i got you covered babydesign the file in inscapehttps://inkscape.org/open image in inscape
5. go to paths and trace bitmap6. seprate the image with the bitmap
7. delete the image8. and set stroke and hit the cross icon to cut the paint on it
9. export the file in png image file format
10. go to mods ce nodeshttp://www.modsproject.org/
3 LASER CUTTING A BOX
today I will teach you a simple method to cut a box on laser cutter wity the hinges which are known as fingers
- head over to makercase for laser cuttelink = https://en.makercase.com/#/basicbox
4. select the type of box that you want to make in my cae it wa sd the basic box5. in here seleclct the appropriate metrics in my case or reccomended is mmand then adjust the values till desired box is achived
6. select the closed box or open box7. then selest the fingers and the no of fingers by sliding the slider
8. download the file in SVG file format
open the file in inscape
10 . do the adjusetments if necessary11 . save the designe in the dxf file format12 . import the file in RD WORKS13.
14. then do the settings according to the reccomened values
15. start the laser cutter and then upload the file by downloading it with the connections
16. start the laser cutter and you are done with this magnificent product
