3D PEINTER

  1. do the desigmning in tinkercad software or any cad software
  2. https://www.tinkercad.com/

4. then export the file in stl format

5. then open the factory software

6.

7. open the file in it

8. then do the settings of the type of filament

9. then connect a pendrive and prepare the data

10 . once it is complete connect it to the 3d printer and start

2.VINYL CUTTER

  1. i got you covered baby
  2. design the file in inscape
  3. https://inkscape.org/
  4. open image in inscape

5. go to paths and trace bitmap

6. seprate the image with the bitmap

7. delete the image

8. and set stroke and hit the cross icon to cut the paint on it

9. export the file in png image file format

10. go to mods ce nodes

http://www.modsproject.org/

3 LASER CUTTING A BOX

today I will teach you a simple method to cut a box on laser cutter wity the hinges which are known as fingers

  1. head over to makercase for laser cutte
  2. link = https://en.makercase.com/#/basicbox

4. select the type of box that you want to make in my cae it wa sd the basic box

5. in here seleclct the appropriate metrics in my case or reccomended is mm

and then adjust the values till desired box is achived

6. select the closed box or open box

7. then selest the fingers and the no of fingers by sliding the slider

8. download the file in SVG file format

open the file in inscape

10 . do the adjusetments if necessary

11 . save the designe in the dxf file format

12 . import the file in RD WORKS

13.

14. then do the settings according to the reccomened values

15. start the laser cutter and then upload the file by downloading it with the connections

16. start the laser cutter and you are done with this magnificent product

Voltage Regulator

Material :

RESISTANCE ( 4.7K OHM )

  • Resistance is the opposition that a substance offers to the flow of electric Current.
  • The standard unit of resistance is the Ohm.
  • विद्युत मंडळात विद्युत प्रवाह म्हणजेच  इलेक्ट्रॉन्सच्या वहनाला जो घटक अडथळा निर्माण करतो त्यास विद्युतरोध असे म्हणतात
  • विद्युतरोध मोजण्याचे एकक ओहम (Ω) आहे.

Resistance Colour Code Link :

CAPACITOR ( 100NF )

  • capacitor is a device that stores electrical energy in an electrical field.
  • The unit of electrical capacitance is the farad (abbreviated F).

Function:

1) Charging and discharging electric charges

2) Keeping the voltage at the same level

Types OF Capacitor :

LM317 IC ( TRANSISTOR )

  • The transistor is a semi conductor device used to control and generating an electrical signals.
  • LM317 is a voltage regulator IC . that IC work dropout voltage .Voltage RegulatoRegul

POTENTIAL METRE

A potentiometer is a three-terminal resistor with a sliding or rotating contact that forms an adjustable voltage divider

Circuit Diagram

Connection

Final

Final

LEASER CUTTER

LEASER CUTTER

Lasers are used for many purposes. One way they are used is for cutting Non-metal plates. the laser cutting process is highly accurate, yields excellent cut quality has a minimal kerf width and small heat affect zone. It makes it possible to cut very intricate shapes and small holes.

How To Use Leaser Cutter

SETUP LEASER STARTUP

Step 1: ON Supply Current

Step 2: Check voltage More than 200V

Step 3: On Stabilizer

Step 4: ON Industrial Cooler

Step 5: ON Main Switch Leaser Cutter

Step 6: Roatat Display Switch

HOW TO UPLOAD FILE IN LEASER CUTTER

step 1: Make ( .dxf ) File Using Coral Or Inscep

Step 2:

Step 3: Click file → Impot

Step 4: Click.Dxf file → Open

Step 5: Be sure to measure

Step 6: Set according to power and speed your material.