Leger cutter
Lasers are used for many purposes. One way they are used is for cutting Non-metal plates. the laser cutting process is highly accurate, yields excellent cut quality has a minimal kerf width and small heat affect zone. It makes it possible to cut very intricate shapes and small holes.
How To Use Leaser
CutterSETUP LEASER STARTUP
Step 1: ON Supply Current.
Step 2: Check voltage More than 200V
Step 3: On Stabilizer
Step 4: Hold This Button After…..
AFTER CONNNET INVERTER
Step 4: ON Industrial Cooler
Step 5: ON Main Switch Leaser Cutter
Step 6: Roatat Display Switch
HOW TO UPLOAD FILE IN LEASER CUTTER
step 1: Make ( .dxf ) File Using Coral Or Inscep
Step 2: open R D work
Step 3: Click file → ImpStep
4: Click.Dxf file → Open
Step 5: Be sure to measureStep
6: Set according to power and speed your material.
Step 7: Attach leaser cutter USB cable In Laptop → Click DownloadStep
8: After Upload File In Leser Cutter. Set orign
HOW TO ENGRAVE MATERIAL
Step 1: SelectSelect the part you want to EngraveStep
2: Double Tap Selected Part ColourStep
3: Click Parameter LibraryStep
4: Choose Engrave Parameter → Click Save AsStep
5: Click Ok
CUTTING VIDEO
