NEED OF THE PROJECT : giving my friend a gift


  1. Laser cutter
  2. MDF board
  3. Motor
  4. Battery
  5. Switch
  6. screw


  1. Cut the on the laser cutter
  2. U=if you don’t know how to operate the laer cutter then refer to my blog on it
  3. Then add the wooden sticks to the body to hold the body
  4. Then add  the screws with the vbody and the motor to hold it in place
  5. Connect the handw with the body with the screws and if needed fewiquick
  6. Then start the motor and there you go