Leger cutter

Lasers are used for many purposes. One way they are used is for cutting Non-metal plates. the laser cutting process is highly accurate, yields excellent cut quality has a minimal kerf width and small heat affect zone. It makes it possible to cut very intricate shapes and small holes.

How To Use Leaser

CutterSETUP LEASER STARTUP

Step 1: ON Supply Current.

Step 2: Check voltage More than 200V

Step 3: On Stabilizer

Step 4: Hold This Button After…..

AFTER CONNNET INVERTER

Step 4: ON Industrial Cooler

Step 5: ON Main Switch Leaser Cutter

Step 6: Roatat Display Switch

HOW TO UPLOAD FILE IN LEASER CUTTER

step 1: Make ( .dxf ) File Using Coral Or Inscep

Step 2: open R D work

Step 3: Click file → ImpStep

4: Click.Dxf file → Open

Step 5: Be sure to measureStep

6: Set according to power and speed your material.

Step 7: Attach leaser cutter USB cable In Laptop → Click DownloadStep

8: After Upload File In Leser Cutter. Set orign

HOW TO ENGRAVE MATERIAL

Step 1: SelectSelect the part you want to EngraveStep

2: Double Tap Selected Part ColourStep

3: Click Parameter LibraryStep

4: Choose Engrave Parameter → Click Save AsStep

5: Click Ok

CUTTING VIDEO