Safety in electric

1) Check  the electrical supply with the help of test lamp.
2) Before working turn of the supply main switch and fuse.
3) Extinguish  the fire by throwing dry sand  on it .
4) Before using a fire extinguisher make sure that it is not outdated and it is of carbon dioxide type.
5) Don’t use water extinguish the fire if the main line is live.
6) Always use PVC or wooden table and stool for repairing job.
7) Connect any instrument / appliances in the presence of a supervisor.
8) Keep the workshop floor clean and tools in good condition
9) Do not renew  a blown fuse until the switch is off.
10) While working on live connections or circuits always use rubber gloves and rubber mat /
insulated tools.
11) Replace  fuse only after switching off the circuits off the circuit switches.
12) Always use 3 pin plug socket , top 3 care wire of appliances.
13) Use  accessories in  good condition.
14)  Always used plug pin top for connecting appliances to the supply.
15)  Always switching off the supply , grip the  plug top carefully and pull it.
16)  Connections in electrical apparatus should be tight.


* CAT 1:- it is contains the place with less risk means  with DC voltage . tools should be properly
working  and insulated.
* CAT 2:- repairing of AC  means 230 volts hand-gloves shoes of rubber ,wooden thing and proper
tools .
* CAT 3:- 3 phase line shoes must be more insulated  helmet required and more powerful  hand
* CAT 4:- it is the categories in which one is working on the top he should required the best safety
and the proper type of tools.

Image result for safety category pictures