NEED OF THE PROJECT : I want to get some experience on how too make a robot


  1.  Two DC gear motors
  2. MDF boards
  3. Screws
  4. Laser cutter
  5. Battery
  6. Switch


  1. Cut the designe according to the file provided
  2. If you don’t know how to do laser cutting then refer to my blog on the laser cutter
  3. After cutting assemble the designe
  4. Connect the 2 main motors to the body
  5. Make sure the rotataion of the motors are in the same direction ( not on in clockwise and other in anticlockwise )
  6. Connect the motor together electrically
  7. After connection connect the wire to the battery
  8. The robot would walk  like in the photo shon beleow