Lasers are used for many purposes. One way they are used is for cutting Non-metal plates. the laser cutting process is highly accurate, yields excellent cut quality has a minimal kerf width and small heat affect zone. It makes it possible to cut very intricate shapes and small holes.
How To Use Leaser Cutter
SETUP LEASER STARTUP
Step 1: ON Supply Current
Step 2: Check voltage More than 200V
Step 3: On Stabilizer
Step 4: ON Industrial Cooler
Step 5: ON Main Switch Leaser Cutter
Step 6: Roatat Display Switch
HOW TO UPLOAD FILE IN LEASER CUTTER
step 1: Make ( .dxf ) File Using Coral Or Inscep
Step 2:
Step 3: Click file → Impot
Step 4: Click.Dxf file → Open
Step 5: Be sure to measure
Step 6: Set according to power and speed your material.
3D PEINTER
- do the desigmning in tinkercad software or any cad software
- https://www.tinkercad.com/
4. then export the file in stl format
5. then open the factory software
6.
7. open the file in it
8. then do the settings of the type of filament
9. then connect a pendrive and prepare the data
10 . once it is complete connect it to the 3d printer and start
VINYL CUTTER
- i got you covered baby
- design the file in inscape
- https://inkscape.org/
- open image in inscape
5. go to paths and trace bitmap
6. seprate the image with the bitmap
7. delete the image
8. and set stroke and hit the cross icon to cut the paint on it
9. export the file in png image file format
10. go to mods ce nodes
