Requipements : 10mm rod , 10 mm die , coolant

Procedure:

  1. At start 10 mm rod is required
  2. Fix the 10 mm rod in the bench vise
  3. Fix the 10 mm DIE in the DIE holder
  4. Slowely turn the die / fix it inside the box
  5. Follow the rule of two clockwise rotation and one anticlockwise rotatio
  6. Use coolant to increase the efficiency of the threading and to increase the life of the DIE

After threading completed spin the DIE one more time so as  to confirm that the threading has been done properly